Ticket #322: screenlog.0

Restarting system.

Please stand by while rebooting the system...



CFE version 1.0.37 for BCM947XX (32bit,SP,LE)
Build Date: �T 12��4 15:54:18 CST 2005 (root@localhost.localdomain)
Copyright (C) 2000,2001,2002,2003 Broadcom Corporation.

Initializing Arena
Initializing Devices.
et0: Broadcom BCM47xx 10/100 Mbps Ethernet Controller 3.90.23.0
rndis0: Broadcom USB RNDIS Network Adapter (P-t-P)
CPU type 0x29006: 264MHz
Total memory: 33554432 KBytes

Total memory used by CFE:  0x80800000 - 0x8089B590 (636304)
Initialized Data:          0x80831700 - 0x80833DE0 (9952)
BSS Area:                  0x80833DE0 - 0x80835590 (6064)
Local Heap:                0x80835590 - 0x80899590 (409600)
Stack Area:                0x80899590 - 0x8089B590 (8192)
Text (code) segment:       0x80800000 - 0x80831700 (202496)
Boot area (physical):      0x0089C000 - 0x008DC000
Relocation Factor:         I:00000000 - D:00000000

Device eth0:  hwaddr 00-17-31-D6-9D-AE, ipaddr 192.168.1.1, mask 255.255.255.0
        gateway not set, nameserver not set
Null Rescue Flag.
Loader:raw Filesys:raw Dev:flash0.os File: Options:(null)
Loading: .. 3732 bytes read
Entry at 0x80001000
Closing network.
Starting program at 0x80001000
CPU revision is: 00029006

Primary instruction cache 16kB, physically tagged, 2-way, linesize 16 bytes.

Primary data cache 16kB, 2-way, linesize 16 bytes.

Linux version 2.4.34 (tg@flyingfish) (gcc version 3.4.4 (FreeWRT rev. 2729)) #4 Mon Jun 11 09:47:52 UTC 2007

Setting the PFC to its default value

Determined physical RAM map:

 memory: 02000000 @ 00000000 (usable)

On node 0 totalpages: 8192

zone(0): 8192 pages.

zone(1): 0 pages.

zone(2): 0 pages.

Kernel command line: init=/etc/preinit noinitrd console=ttyS0,115200 rootfstype=squashfs root=/dev/mtdblock2

CPU: BCM4704 rev 9 at 264 MHz

Using 132.000 MHz high precision timer.

Calibrating delay loop... 262.96 BogoMIPS

Memory: 30496k/32768k available (1464k kernel code, 2272k reserved, 100k data, 88k init, 0k highmem)

Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)

Inode cache hash table entries: 2048 (order: 2, 16384 bytes)

Mount cache hash table entries: 512 (order: 0, 4096 bytes)

Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)

Page-cache hash table entries: 8192 (order: 3, 32768 bytes)

Checking for 'wait' instruction...  unavailable.

POSIX conformance testing by UNIFIX

PCI: Initializing host

PCI: Fixing up bus 0

PCI: Fixing up bridge

PCI: Fixing up bus 1

Linux NET4.0 for Linux 2.4

Based upon Swansea University Computer Society NET3.039

Initializing RT netlink socket

Starting kswapd

Registering mini_fo

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)

devfs: boot_options: 0x1

JFFS2 version 2.1. (C) 2001 Red Hat, Inc., designed by Axis Communications AB.

squashfs: version 3.0 (2006/03/15) Phillip Lougher

pty: 256 Unix98 ptys configured

Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ SERIAL_PCI enabled

ttyS00 at 0xb8000300 (irq = 3) is a 16550A

ttyS01 at 0xb8000400 (irq = 3) is a 16550A

b44.c:v0.93 (Mar, 2004)

eth0: Broadcom 47xx 10/100BaseT Ethernet 00:17:31:d6:9d:ae

eth1: Broadcom 47xx 10/100BaseT Ethernet 40:10:18:00:00:2d

 Amd/Fujitsu Extended Query Table v1.3 at 0x0040

number of CFI chips: 1

cfi_cmdset_0002: Disabling fast programming due to code brokenness.

Flash device: 0x800000 at 0x1c000000

bootloader size: 262144

Physically mapped flash: Filesystem type: squashfs, size=0x4e173a

Creating 7 MTD partitions on "Physically mapped flash":

0x00000000-0x00040000 : "cfe"

0x00040000-0x007d0000 : "linux"

0x000b7800-0x005a0000 : "rootfs"

mtd: partition "rootfs" doesn't start on an erase block boundary -- force read-only

0x007f0000-0x00800000 : "nvram"

0x007d0000-0x007f0000 : "fwcf"

0x00040000-0x007f0000 : "fwrt_all"

0x005a0000-0x007d0000 : "rootfs_data"

IEEE 802.2 LLC for Linux 2.1 (c) 1996 Tim Alpaerts

NET4: Linux TCP/IP 1.0 for NET4.0

IP Protocols: ICMP, UDP, TCP, IGMP

IP: routing cache hash table of 512 buckets, 4Kbytes

TCP: Hash tables configured (established 2048 bind 4096)

NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.

802.1Q VLAN Support v1.8 Ben Greear <greearb@candelatech.com>

All bugs added by David S. Miller <davem@redhat.com>

VFS: Mounted root (squashfs filesystem) readonly.

Mounted devfs on /dev

Freeing unused kernel memory: 88k freed

Algorithmics/MIPS FPU Emulator v1.5

diag: Detected 'ASUS WL-500g Premium'

Probing device eth0: found!

b44: eth0: Link is up at 100 Mbps, full duplex.

b44: eth0: Flow control is off for TX and off for RX.

Press reset now to enter Failsafe!
Unlocking linux ...
switching to overlay filesystem
mini_fo: using base directory: /

mini_fo: using storage directory: /jffs


init started:  BusyBox v1.4.2 (2007-06-08 16:06:06 UTC) multi-call binary

Please press Enter to activate this console. jffs2.bbc: SIZE compression mode activated.

NET4: Ethernet Bridge 008 for NET4.0

PCI: Enabling device 01:02.0 (0004 -> 0006)

wl0: Broadcom BCM4318 802.11 Wireless Controller 4.80.53.0

IPv6 v0.8 for NET4.0

IPv6 over IPv4 tunneling driver

loop: loaded (max 8 devices)

SCSI subsystem driver Revision: 1.00

Universal TUN/TAP device driver 1.5 (C)1999-2002 Maxim Krasnyansky

eth0: duplicate address detected!

ip_conntrack version 2.1 (5953 buckets, 5953 max) - 308 bytes per conntrack

ip_tables: (C) 2000-2002 Netfilter core team

CSLIP: code copyright 1989 Regents of the University of California

usb.c: registered new driver hub

PCI: Enabling device 01:03.2 (0000 -> 0002)

ehci_hcd 01:03.2: PCI device 1106:3104

ehci_hcd 01:03.2: irq 2, pci mem c0211000

usb.c: new USB bus registered, assigned bus number 1

EHCI: Enabling VIA 6212 workarounds

ehci_hcd 01:03.2: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4

hub.c: USB hub found

hub.c: 4 ports detected

usb-ohci.c: USB OHCI at membase 0xb8003000, IRQ 6

usb-ohci.c: usb-00:03.0, PCI device 14e4:4715

usb.c: new USB bus registered, assigned bus number 2

hub.c: USB hub found

hub.c: 2 ports detected

Initializing USB Mass Storage driver...

usb.c: registered new driver usb-storage

USB Mass Storage support registered.

: 
 * Starting iface lo ...

: 
 * Bringing up iface lo
 * [ ok ]

: 
 * Starting vlan eth0.0 ...

: 
 * Creating vlan eth0.0
 * [ !! ]

: 
Error: Configured switch port(s) already in use

: run-parts: /etc/network/if-pre-up.d/main exited with return code 1: Success

: 
 * Starting vlan eth0.1 ...

: 
 * Creating vlan eth0.1
 * [ ok ]

: 
 * Bringing up vlan eth0.1
 * [ ok ]

: run-parts: /etc/network/if-pre-up.d/main exited with return code 1: Success


          ______             _       ______  ______
         / ____/_______  ___| |     / / __ \/_  __/
        / /_  / ___/ _ \/ _ \ | /| / / /_/ / / /
       / __/ / /  /  __/  __/ |/ |/ / _, _/ / /
      /_/   /_/   \___/\___/|__/|__/_/ |_| /_/

 ---- functional and secure GNU/Linux distribution ----
 -------------- development revision 2759 -------------

 To not lose changes to files in /etc store them in flash with "fwcf commit".

root@FreeWRT:/ # ip addr show

1: lo: <LOOPBACK,UP> mtu 16436 qdisc noqueue 
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    inet6 ::1/128 scope host 
2: eth0: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast qlen 1000
    link/ether 00:17:31:d6:9d:ae brd ff:ff:ff:ff:ff:ff
    inet6 fe80::217:31ff:fed6:9dae/64 scope link tentative 
3: eth1: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 40:10:18:00:00:2d brd ff:ff:ff:ff:ff:ff
4: wl0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop qlen 1000
    link/ether 00:17:31:d6:9d:ae brd ff:ff:ff:ff:ff:ff
5: sit0@NONE: <NOARP> mtu 1480 qdisc noop 
    link/sit 0.0.0.0 brd 0.0.0.0
6: eth0.1: <BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue 
    link/ether 00:17:31:d6:9d:ae brd ff:ff:ff:ff:ff:ff
root@FreeWRT:/ # cas t /et   
root@FreeWRT:/ # cat /etc/                                                     
root@FreeWRT:/ # cat /etc/                                                     ne       
root@FreeWRT:/ # cat /etc/network/                                             
root@FreeWRT:/ # cat /etc/network/                                             in               
root@FreeWRT:/ # cat /etc/network/interfaces                                    
root@FreeWRT:/ # cat /etc/network/interfaces                                   

# basic network configuration file for more information,
# see the FreeWRT user handbook

auto lo
iface lo inet loopback

# LAN port configuration
auto eth0.0
iface eth0.0 inet static
        switch-ports 1 2 3 4 5*
        address 192.168.1.1
        netmask 255.255.255.0
        
        broadcast +

# WAN port configuration
auto eth0.1
iface eth0.1 inet dhcp
        switch-ports 0 5
        broadcast +
root@FreeWRT:/ # 

root@FreeWRT:/ # # shutdown gibt *ganz* viele fehlermeldungen

root@FreeWRT:/ # 

root@FreeWRT:/ # halt

root@FreeWRT:/ # : 
 * Stopping iface lo ...

: 
 * Bringing down iface lo
 * [ ok ]

: 
 * Stopping iface eth0.0 ...

: 
 * Bringing down iface eth0.0ip: device "eth0.0" does not exist

: BusyBox v1.4.2 (2007-06-08 16:06:06 UTC) multi-call binary

: Usage: ip [OPTIONS] {address | link | route | tunnel | rule} {COMMAND}

: ip [OPTIONS] OBJECT {COMMAND}

: where  OBJECT := {link | addr | route | tunnel |rule}

: OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }

: ip: SIOCGIFFLAGS: No such device

: BusyBox v1.4.2 (2007-06-08 16:06:06 UTC) multi-call binary

: Usage: ip [OPTIONS] {address | link | route | tunnel | rule} {COMMAND}

: ip [OPTIONS] OBJECT {COMMAND}

: where  OBJECT := {link | addr | route | tunnel |rule}

: OPTIONS := { -f[amily] { inet | inet6 | link } | -o[neline] }

: 
 * Stopping vlan eth0.1 ...

: 
 * Bringing down vlan eth0.1
 * [ ok ]

: 
 * Destroying vlan eth0.1
 * [ ok ]

: run-parts: /etc/network/if-down.d/main exited with return code 1: Success


The system is going down NOW !!

Sending SIGTERM to all processes.

143|root@FreeWRT:/ # 
Sending SIGKIL
Requesting system halt.
System halted.

System halted