merge the rest

copy trunk/freewrt r3264 into a new branch for making the nfo system
because upgrading the old adk branch would be a hell more work

make postinstall scripts require mksh as functions.sh does
(how good it's in lbin/ anyway)

part Ⅱ – simplify busybox config, ok wbx@
from now on, you can select a smaller and a fuller busybox, like mksh;
if you want fewer applets, hand-edit the config, we won't prevent you,
but shan't support it in the ADK any more; if you want more applets,
please talk to me and I'll see if they can be included in the list

we still have a problem regarding duplicate binaries (ip, free, tar, …)
which could be solved with dpkg diversions if ipkg supports them;
for now just consider busybox a non-upgradable package if you have any
of these installed

fixed broken vlan stuff

fixed wpa

revert r3103 – the code is not bridge only (in theory, but no other
interface uses it YET) and I put it in there not without thought

- moved bridge watchdog into bridge code

prevents from entering format code into the messages

- updated mprint(), use printf from now
- moved mprint stuff to mfunctions
- cosmetic output format changes

ifacelist is not local!

I won't write a commit message this time out of politeness…

- updated wl-broadcom script to work with latest wl
  this is untested but the old one doesn't work and 
  i have no time to test next days

- removed output noise from ifup, used mprint instead of echo

- updated manual stuff, from now manual doesn't configure iface
  but sets it up or down

- removed bridge shutdown if bridge init fails
  not to 100 percent complete initialized bridge is better than
  having no network, the normal user doesn't have serial access

15 seconds is a little few, I get times between 11 and 13 seconds it needs
for even only one bridge, let's say up to 30s is okay

• bugfix
• use echo, not mprint, I don't understand it, there's no docs, and echo works
• typo

show how long we took as well

experimental: reduce number of calls to brctl by running only one watchdog
which handles all bridge interfaces at once, sequentially

spaetzle@ said it's okay if I lay hand on this script ☺
will be tested soon

added non blocking bridge init watching
adding 15 seconds delay per bridge is not the deal, nobody says that we have only one bridge

some portability fixes

- added back method manual to the valid methods
- moved lladdr to the right place, this is cosmetic
- removed /etc/init.d/ifupdown, nobody needs this
- removed zero size file wl-broadcom
- fixed fwifupdown Makefile changes from tg@

throw if{up,down} here, req'd by wbx@ and spaetzle@

fix fwifupdown startup bug

bump dashver after spaetzle@

some fixes to make shell code portable

remove dhcp from here

according to wbx@ busybox AUTOMATICALLY starts udhcpc if it's compiled
and the dhcp keyword is found by ifupdown

an alternate solution would be required to support this

readded dhcp support, removed by tg some days ago
tested on asus wl-500gd with success

fixed failsafe cleanup, should fix #322 and #332

argh, network didn't work!

• move all the stuff to our /etc structure
• fix lladdr, d'oh

fix the non-fancy mode to not display _any_ ANSI colour codes at all
XXX this implementation is horridly inefficient…

I don't have the slightest idea why, but udhcpc is run from someplace
else (maybe busybox?), so remove our own “let's run a dhclient” stuff
in order to not run two of them, this fixes my WAN connectivity, wow…

changed location of network files to /etc/network
fixed bug in /etc/network/plugins/lladdr

nuke set -u, ok spaetzle@
(rides on old dashver bump)

• dhcp method: run as 'up' not as 'pre_up', because we must
  set the interface to up to work
  (I still don't get an address…)
• lladdr plugin: new, use something like
  | auto eth0.1
  | iface eth0.1 inet dhcp
  |         switch-ports 0 5
  |         broadcast +
  |         lladdr 00:17:31:d6:9d:ae
  to use this (note: the format string is checked)
• main.sh: fix running of plugins
• Makefile: install lladdr plugin, bump dashver

added quick hack to get network working if switch ports configured

@tg: should solve youre problem

someone forgot to bump the dashver

set KSH_VERSION default value if undefined

make more readable and fix some of the worst bugs
it still doesn't configure my interfaces correctly
but now, at least failsafe works…

package/fwifupdown/Config.in:8:warning: 'select' used by config symbol 'FWRT_PACKAGE_FWIFUPDOWN' refer to undefined symbol 'FWIFUPDOWN_CONFIG_PPP'
package/fwifupdown/Config.in:11:warning: 'select' used by config symbol 'FWRT_PACKAGE_FWIFUPDOWN' refer to undefined symbol 'FWIFUPDOWN_CONFIG_WL_BROADCOM'
package/fwifupdown/Config.in:12:warning: 'select' used by config symbol 'FWRT_PACKAGE_FWIFUPDOWN' refer to undefined symbol 'FWIFUPDOWN_CONFIG_WL_ATHEROS'

thou shalt not commit conflict markers
(doesn't svn warn here? cvs does…)

from wbx' commit this morning:
-PKG_RELEASE:=          6
+PKG_RELEASE:=                  5

You know, bumping goes the other way ☺

sorry, but we need help to test the new ifupdown scripts. 
THIS WILL BREAK STUFF, PLEASE ONLY USE TRUNK NOW IF YOU KNOW HOW TO USE
SERIAL CONSOLE OR FAILSAFE.

Sometimes test first is not applicable. brcm-2.4 is tested by Christian.

Extra reboot for jffs2 is obsolete, we have adapted the OpenWrt method.

• base-files/files/etc/init.d/rcK, base-files/files/etc/init.d/rcS:
  do correct shebang processing, like the BSD kernel and mksh: get
  first line of script to run if it begins with "#!", strip that and
  any leading space/tab off, then get shell name (terminates with
  space/tab/end of string) and shell argument quoting according to
  unix common proceedings; use /bin/sh as interpreter if none could
  be found
• mk/package.mk: ensure all init scripts are 0755 by default
• busybox: flesh out inetd init script, so that all init scripts in
  FreeWRT either can be found with -path \*/init.d/\* or -name \*.init
• other packages: add #!/bin/sh shebang line to init scripts¹, bump dashver

¹) change this to /bin/ash if you use ash-specific features that mksh
   can also do; never use ash-specific features that mksh cannot do (are
   there any?), change to /bin/mksh if you use mksh-specific features
   and add a run-time dependency on mksh in that case

make this look a little more like our other init scripts

by request of wbx@, add a clause
| autostop) ;;
to all cases inside all init scripts so that we won't have any
errors on shutdown. the alternative would be
| autostop) exec $0 stop "$@" ;;
of course, for packages that want it.

also bump all patchlevels again *sigh*

attention: mechanical commit. please read diff and fix breakage
if you are package maintainer.

added CFG_DEBUG, requested by wbx@

set -x will be set if CFG_DEBUG == 1

added CFG_FANCY, requested by wbx@

no ansi escape codes will be send to STDOUT if CFG_FANCY != 1

grr @ whoever wrote this…

by request of wbx@:

make it possible for users to do
| /etc/init.d/<foo> restart
instead of having to do
| /etc/init.d/S*<foo> restart
by moving the order into a magickal™ comment.

Untested.

Also remove the svn:executable properties, because rcS and rcK will
always call them with /bin/sh, and bump dashvers accordingly.

dhcp bugfix

dhcp pidfile fixes

fixed failure handling bug

tag: fwifupdown_0.2-1

- lot of fixes and code cleanup
- nas startup und shutdown fixes
- dhcp support added

- documentation update will follow as soon as possible

changed some more config variables

revert changes from dirk because busybox ifupdown is the default until CFG_BUSYBOX_COMPAT is commented or set to != 1

some config variables changes, removed some unnecessary code

some wl-broadcom changes, seems to work

Space and Tab cleanup, set default to no for now until everything is implemented and tested.

fix some of the worst spelling and caps errors while here

set svn:ignore on info.mk files via, svn propset svn:ignore info.mk package/tunctl/

some fixes

updated fwifupdown doc

forgotten to increment PKG_RELEASE

added fwifupdown tuntap support

added package tunctl

some fixes to get set -u working

added wl-broadcom script from dirk in new style, should do the work at the moment

Added package fwifupdown, added busybox ifupdown patch