Security upgrade to 2.1_rc9

By default the linux usb core sees only 64 bytes of capacity. Without this work-around there is no way to specify what the maximum packet size on the inbound bulk endpoint should be. If you consider that the MTU on these cards is set at 1500 and the usb bulk endpoint callbacks are only reading 64 bytes at a time off of the serial tty, it doesn't take long to start dropping packets and seriously junkify your connection.

This patch adds a third module parameter so you can specify what you think the inbound endpoint maximum packet size should be. If the parameter is not set at module loading time, it defaults to 0 and the maximum packet size detected by the usb core will be used.

The parameter name is : maxSize.

- added separate example configurations for client and server mode
- added feature to enable management interface by menuconfig

OpenVPN update to rc8

dnsmasq updated to 2.43.

added Option GE0301 HSUPA card

fixed mirror URLs

Update iptables to 1.3.8

Update kernel to 2.4.36.6

reverted the patches somone removed ... and fixed them

bump new version

Small build fix

Openssl security update

UMTS via USB modem is possible with all devices

added two product ids for generic usbserial driver

more 2.4.36.4 fixes

Update ncurses package

update to mksh-R33d, fixes SA29803 (CVE-2008-1845)

Next 2.4.26.4 updates

First Update to 2.4.36.4

fixed double startup of nas on bridged systems

New version

Latest release

Latest release

Latest release

Latest release

Latest version

Fixed the problem that the settings cannot be seen on the interfaces. This bug is fixed in the 0.99.9 release.

fix dependency, Closes: #393

update to R33c here too
- tested that both full and small versions compile
- full version is even 4K smaller than R31c oO

- fixed confusion of wds hotplug script
brctl was confused if awk had figured out a commented wireless-wds-bridge statement

changed PKG_SOURCE to R31d

added documentation for network logging

you cannot use a hash sign in /etc/network/interfaces, not do you need it there
thanks to “honzer” on IRC for noticing

tentatively upgrade to mksh R31d

Reenable PPP multilink

save 8528 bytes by disabling code we do not need anyway
• persistent history makes no sense on /tmp
• neither does ~foo/ support for determining others' homes
• and mknod(1) doesn't need to be a builtin for now

MFC: mksh R28 → R31c+20070926

Reason:	the busy-loop problem, which was fixed in R31b, was discovered
	by spaetzle@ even doing some simpler pattern matching; also cf.
	http://bugs.debian.org/296446 and http://mirbsd.de/mksh#clog

Side effects:
• you can now select to build a full-featured mksh in menuconfig
  (still defaults to ‘n’, as does mksh itself)
• the new dot.mkshrc file offers pushd/popd/dirs (csh-like) as
  well as the precmd() and chpwd() hooks (zsh-like)
• added dependency on busybox: “readlink -f”
• UI still the same, except no $? in $PS1 any more (req. by yofuh)
• /etc/mkshrc is now an ipkg conffile and handled appropriately
• building with pcc should be possible (if you turn optimisation off)

Tested:
• FreeWRT 1.0-stable, ASUS WL-500g, mksh as /bin/sh+/bin/ash full-featured
• FreeWRT-current (by spaetzle@) before the MFC

correct a typo and add some documentary comments
ok wbx@

Update Openswan to 2.4.9 like trunk, Ralph OK.

use our vendor zone, this is important to prevent desasters
note: people deploying appliances based upon FreeWRT in very
large numbers (thousands, or even more) should definitively
get their own vendor zone instead

Merged fix for poff (part of pppd) from trunk.

* another asterisk bugfix release
* and yet another php5 security update release, containing this fixes:
  - Fixed an integer overflow inside chunk_split() (CVE-2007-2872)
  - Fixed possible infinite loop in imagecreatefrompng. (CVE-2007-2756)
  - Fixed ext/filter Email Validation Vulnerability (CVE-2007-1900)
  - Fixed bug #41492 (CVE-2007-1887)

fixed merge error, thx aptituz

* enable txfonts again (fonts were looking like chaos before?!)
* add some usb-storage documentation

updated to asterisk 1.2.20

replicate r3096, as it's needed here too

integrating fwrtc also into 1.0, ok'ed by tha@

add some documentation of fwrtc, the FreeWRT Traffic Control script

adding unlinkd in squid package (closing bug #356)

updated asterisk to latest stable (bugfix) release.

Madwifi (fixing bug: #155):
 - downgraded to 0.9.2.1, because in 0.9.3.x the madwifi kernel module
   oopses in monitor mode.
 - applied debian's security fixed for 0.9.2.1, because every 
   unpatched version before 0.9.3.1 is vulnerable to three knows security
   issues (see madwifi.org).
 - converted four manual patches to the freewrt patch format
 - thx to shorty for sending a one-liner fix in the Makefile for 0.9.2.1

Aiccu (fixing a bug reported via the xen-users ml by Frank Matthiess):
 - merged fix from trunk rev #2881 for fixing a bug regarding a broken
   IP Header in the aiccu packets.

Broadcom-wl-util (fixing bug: #334):
 - qouted the wpa password in the if-<pre>up.d scripts.
   hopefully this fixes this bug. Until now I only checked that it 
   doesn't brake something that was already working before.

Freeradius (fixing bug: #321):
 - the init.d script now exports the correct library path before radiusd
   is started. otherwise the daemon fails in certain setups because some
   libraries cannot be found. thx to tg for this fix.

License:
 - updated the license file to refelect the current developer team.
   the names and the alphabetic order has been "stolen" by me from
   http://www.freewrt.org/trac/wiki/Development/Developers

upgrade to latest php 4/5 release, because a lot of security related
problems gets fixed. to be exact, the following list of CVE's ;)

CVE-2007-0988, CVE-2007-1001, CVE-2007-1375, CVE-2007-1376,
CVE-2007-1380, CVE-2007-1383, CVE-2007-1453, CVE-2007-1454,
CVE-2007-1460, CVE-2007-1461, CVE-2007-1484, CVE-2007-1521,
CVE-2007-1522, CVE-2007-1583, CVE-2007-1700, CVE-2007-1717,
CVE-2007-1718, CVE-2007-1824, CVE-2007-1889, CVE-2007-1900

merged rev. 2776 from wireless-atheros.pre-up for branch/1.0
Original commit message: moved exit 0 to the end, requested by th at irc

fixed a lot of startup or shutdown related problems
- added start/stop logik to S10boot, S20jggsclean & S98done
- fixed check for empty variable in vlan.pre-up (ugly erros in log)
- aiccu only gets killed when it was really running before
  (otherwise it logs ugly messages to syslog)
- ntpclient packages now has an init.d script and some
  reasonable default flags. if present, the serverhost comes
  from /etc/ntpd.conf
- removed hotplug ntpclient script, I think it never worked
  correctly
- ntpclient & openntpd are waiting 15 seconds in autostart
  mode before they are executed. in bridging-wlan/lan-mode
  this seems to be neccessary, because otherwise ntp(client)
  cannot sync (network not really up?)
- shorewall only executes "shorewall stop" if it was started
  before.
- fixed rcK script: the -k2 option was useless in our case (thx tg)

* as discussed with tg, the rcK script doesn't get started in background
  anymore
* "busybox reboot" with a delay of 60sec is executed before the rcK
  script is started, so we can be sure that even if one init.d-script's
  stop function is broken the system still will reboot after max 1 min.

hope this is enough for fixing ticket #320: shut down network interfaces
before rebooting

I have no serial, but on my remote syslog I got this:
Jun 11 02:07:28 whitebox init: Starting pid 1141, console /dev/tts/0: 
'/etc/init.d/rcK'
Jun 11 02:07:28 whitebox System log daemon exiting.

New upstream release, fixing the following security issues:
 - CVE-2007-1869
   Remote attackers could cause denial of service by disconnecting
   partway through making a request.
 - CVE-2007-1870
   A NULL pointer dereference could cause a crash when serving files
   with a mtime of 0.
(fixing freewrt-ticket #325)

remove the “reboot” shell alias, like in trunk when we introduced
the fwcf reboot script hook, ok tha@

fixed socat by disabling termios (ticket 292)

package/base-files/.svn/entries is required for /etc/banner generation

• 1.0 -> scripts/param.h, paxmirabilis: MFC the new version from trunk
• both 1.0 and trunk: implement “make targz”, “make tarbz2”
  (I like the gzip(1)d versions better though)
• 1.0 -> package/config/Makefile: quieten the “clean” target to be consistent

activate openser accounting

update to latest stable upstream, disable rfkill on module load, instead of a patch

added missing client dependancies

update to latest upstream version, sync with trunk

create needed directory, from aep via irc

update download url and md5sum

add PKG_CONFIG_PATH

add dependency to kmod-nfs

add esd sound daemon, nice for network sound card, idea and esd patch from Sven Geggus

add ipt_LOG to description

test commit

resolve conflicts, n0-1 told me not to break this

cleanup WLAN examples

update to latest stable version (security fixes), remove pbx_dundi, i do not use it and it fails to load

disable ipt_string, does not load correctly

add fix for more than two wds nodes

full long line cleanup. note that this should not have changed anything at the produced pdf

Integrate some latex improvements into the handbook

* many thanks to Lars Weiler for sending the patch
* now there are latex commands for choosing the appropriate
  font style (\code{}, \app{}, \file{}, etc.)
* some tabular environments were changed to longtable, to
  allow breaking them at page borders
* always prefer Verbatim (fancyvrb) over verbatim (ugly standard)
* added a TODO pointing to missing documentation about wireless gmodes,
  please someone with a clue document the different modes
* tried to prevent automatic page breaks to keep diff small
  (will correct all long lines in another commit)

default wlan setup should be compatible with most of available wlan-wpa-clients

test commit

remove some unused code

before tg blames me again

WDS link can and should be separate secured. If you do not
set wireless-wds-security, the WDS will not be secured. 
The nas4not binary (a symlink to nas) can only use WPA1 PSK with AES or TKIP.
The normal access point can still be configured as WPA1/WPA2 with AES or TKIP, 
whcih allows more compatibility on client side.

some minor corrections to the handbook..

if-up.d should be created prior moving data to it.

* Bugfix for bridges wireless lan (once again *g*)

remove debug statement

revert peercast update

fix wds+wep and wds+wpa+psk, wpa+psk2 does not work. rename most packages without upstream version number to freewrt release number, remove open+shared mode stuff. what is it anyway? dirk?

disable sasl in openldap

fix md5sum

sync with trunk

fix for ticket #275 from trunk

update pcre, enable pcre for php5 again

fix for overlapping partitions #270

remove speex support in asterisk, will not be fixed in 1.0 branch

remove squashfs symlinks root filesystem, it is ugly and overlay works stable and fine. 1.0.3 will come without squashfs-symlinks filesystem support. it is removed in trunk already. I never suggest to use symlinks method and we should not support it anymore

add package files for option-icon

add pptp support for startup scripts, add option-icon package for usb modems, fix dependency of ctorrent

fix dependencies and defaultconfig

you can now change the mac address for ethernet devices eth0.x via interfaces

fix description for maclist (no quotes)

* missed the patch for the lib.base file in my last commit

* changed "ip route ls ..." to "ip route list", because the busybox
  ip command doesn't understand that "ls" is the same as "list".

remove svn dependency, bugfix from trunk

fix package creation of iptables-firewall-script

add help from trunk minus stuff which does not work in 1.0

add a startup script for mpd

add help description, soundcore+audio is enough to play music f.e. via mpd, no need for alsa

disable obexftp, seems to be broken and unfixable, at least for me

update shorewall from trunk, add iptables firewall script package

install scripts as executable

add a startup script

some docs about VLAN trunking, second part of wds support, tested and working without any encryption, more to come

first part of wds support

use devfs syntax

hmmmmm. if you know that apn should not contain quotes, it really suckz if the example configuration conatins empty quotes. this shit cost me more than 6 hours of debugging. please document stuff, yes markus, i mean you :p

minor corrections from one of my train trips

add dependency to zlib

ignore custom files inside file/

raise bottom margin to assist certain printers in including the page numbering

* fixing bug #267

add some more examples

someone missed a test here I guess?

fix #236

fix ctorrent, link with uclibc++

add missing patches

* enabled arp-filter for all interfaces by default, as discussed
  on the freewrt-devel mailinglist.

remove obsolete file

update gpg, cups and php4, remove php4-sqlite, use php5 if you need sqlite

disable BUSYBOX_CONFIG_BUILD_AT_ONCE, breaks compile, fixes issues #225,#151

fix for #252

update to latest upstream

update to 2.4.1 from trunk

another security update

remove some dots

add missing scripts

add fwcf 1.0.3, new features fwcf status, reboot/halt hooks are generating a warning if uncommitted changes exist in /etc

embed adk .config into image, useful for security updates, copy over your config, rebuild an image, flash the new image just th the security/bug fixes added, idea from tha/sum

another fix from sum

disable cyrus-sasl for the host tools

add user and group via postinst

fixed wrong interface name, 'umts' does not work together with pppstats

MFC: rewritten fgetln.c from r2229 which really works
the failure couldn't be easily seen with pax or grep,
but with grep from stdin (you can verify this against
Han's¹ grep with the old fgetln.c and cat *.c|grep C)

¹) http://www.xs4all.nl/~hanb/software/portable_openbsd_grep-1.0.tar.gz

update to latest stable version

enable sasl for php5

update to latest php5 version, pcre needs to be updated

fix #253

fix typo, from bombadil (Micha Lenk) via IRC

Bugfix for bridged wireless lan setups:
* updated handbook.tex for the new interface option "wireless-bridge-if".
* now the nas-daemon will be restarted after a bridge 
  with an wifi interface attached has been configured.

I know this bugfix is quite ugly, that's why it's just for the 1.0 branch.
The network script in trunk will get rewritten soon anyways.
Wbx agreed in just commiting this in branch.

This closes bug #236.

we need ipt_LOG.o that shorewall can log to systemlog

should fix #241, please test

add/reorder dependencies to kmod-bluetooth

sync usb2 fixes with OpenWrt, tested via rsync between two 3,5 zoll hard disks connected to an asus wl500gp, need to be verified for trunk later

added missing init priority

Update OpenSSL to 0.9.8e.

- added the usage of new comgt script to check SIM availability

- added small script to be started at first on if-pre-up for umts
  to wait for SIM to get ready. Otherwise in some situations we
  got "**SIM ERROR**"

- added TARGET_CFLAGS
- added custom selection of features/hashes/ciphers to config
- reduced size by about half

- added optional ping check to the interface watchdog
- documented watchdog in interfaces file

remove ifconfig/route alias, they only confuse people

sync with trunk

damn path failure ...

added a workaround to build properly.

After compiling the package the install section was run againt to
build the image file. This second run did not work because we changed
the content of /etc with the first run.
Now I force a remove of /etc before the "make install" call.

Sync dnsmasq with upstream version, which includes now a tftp and a bootp server. tftp tested. Now you can set up a PXE boot enviroment for diskless clients with FreeWRT only!

fix ticket #229, thx for report

sync file_subs.c (and what depends on it) with trunk,
this one contains a fix for a bug that could have led
to, under certain circumstances, the inability to ex-
tract .ipk files on the build system

XXX we could update all of paxmirabilis, in theory

bump dash-ver, should've been done in -r2037

fix startup script restart, thx Matthias Heinz

fix PR#222, PR#223

tested by <moehrengrass> (chris) via IRC

remove linksys 1.x models

disable linksys wrt54g 1.0/1.1

sync with trunk r1977

* PKG_RELEASE=PKG_RELEASE+1

* merging the last trunk changes to branch

OK, we found some cases where the legacy ioctl-Interface is used to determinate ip and broadcast address from an interface (olsrd). For many years there is a netlink interface, but some programmers ignore it. With this interface it is not possible to see the internal broadcast route ("ip route show table local  | grep ^broadcast"). I added a "broadcast +" option to all example configs, the broadcast is then determinated automatically by the kernel (tested with various netmask combinations).

fix some more asterisk build issues

* sync trunk and branch

disable Linksys 1.x support. FreeWRT does not work on these devices and after I killed my Linksys 1.1 a few minutes ago, we are even not able to fix this issue. Golden rule, FreeWRT only supports devices we have access to. I am not sure if i get my Linksys JTAG'ed, but my uart tests failed. My UART works fine on Asus WL500g/Linksys WAP, but not on my Linksys WRT54G1.1. A very sad day, my first really dead *WRT since december 2004, where I got my first Linksys WRT54GS v1.0, still alive and one of my test machines, and started with OpenWrt.... 

disable speex, it loads, but then asterisk hangs for ever, need more time to debug this, to late for 1.0.2

* remove old asterisk-mini ipkg files
* update to Asterisk 1.2.15
  verified to work with ulaw/alaw/gsm calls between to 
  SIP phones connected to the Asus WL500gP switch

  ... more tests to come soon

* update aircrack to aircrack-ng, requested by Michael Schwab,
  aircrack-ng is better maintained and allows packet injection
  with madwifi (a small patch is needed for that)
* fix axtls package, the package contains a small SSL webserver named
  axhttpd (20kb size) 
  - the webserver is axhttpd, not awhttpd
  - latest upstream version used
  - fixed cross-compile problem
  - fix strange setuid stuff from upstream, if axhttpd is started
    as root, the process gets first nobody rights and _after_ that he
    tries to bind a port under 1024 !? Don't know how this could ever work,
    but a simple html page is displayed correctly, after applying the patch

disable dbus, reported by rbu via IRC

ipt_physdev dead comment

fixed broken symlink 'setup' needed by init-script

remove make check, which breaks build on OpenBSD

this adds a short delay/check loop to give UMTS cards some time
for initialization.

additionaly I added a sanity check before sending an empty PIN
to the SIM card.

I still have a problem with some SIM cards which initialize to
slow. In certain circumstance you already have a serial interface
but get an error "SIM NOT READY".

I added a small watchdog scripts useful for monitoring dial-up devices.
We need this because of unstable UMTS connections far outside of
our office.

If you set "watchdog on" in your interfaces the script checks each
minute if the interface is still present and UP.

After 3 failures the router will be rebooted immediately.

BTW: this is generic and might be used on every kind of interface.

- fixing collateral damage to buildsystem due to removing ebtables/arptables

fix for #207, bridge interface should always be the last interface

sync package with trunk, some extra patches and features missing (zaptel, bluetooth), some stuff removed

* Fixed Makefile, so that it works in the 1.0 Branch
* Don't ship empty directory or two times the init.d script
* enabled shorewall again

* fixed Makefile for rsync,bind & nano (d'oh)... this time it's all tested :)
* disabled shorewall until the Makefile is "downgraded" to freewrt 1.0 style

add new package trafshow, useful to identify bandwith consumers in a business environment with f.e. more than 40 people using freewrt as main firewall

svn propset svn:ignore info.mk package/shorewall

* Updated Bind to 9.3.4 using the new style from trunk

* updates branches/freewrt_1.0's nano package to 2.0.3,
  using the Makefile from trunk, because it already uses the new style

updated rsync to 2.6.9.
* used the Makefile from trunk, because it already uses the new style.

added shorewall to branches/freewrt_1_0

startup script fix from Sebastian Fontius

mini-httpd needs zlib

update speex to 2.0beta, use fixed-point implementation

add dependency for asterisk and gpsd

wrt54gsv4 has reverse switch order

update aiccu, reqested by markus thiesen, older versions does not work anymore with SIXXS

remove ebtables/arptables, add dependency to openvpn (kmod-tun, liblzo)

install library to the correct path

stability fix for bugs #196, #165 and #204.

ebtables patch triggers a memleak in the ip route destination 
cache. even if you do not use ebtables, the bug is there. You just need
to use bridging, netfilter and routing. I normally never use bridging, 
because it is slow and unsecure (I mean WLAN-LAN bridge) therefore I never
had this problem on our productive routers.

I have no idea how to fix the ebtables bug, and I never use ebtables.
If somebody will fix the bug, we can add back ebtables for FreeWRT 1.1.

WIB will generate images with the bug fixed, so generate new images.

remove wrong maintainer

add a space before url - looks better for me

add djbdns, ucspi-tcp and daemontools submitted by Klaus Reimer

forgot to change release number

activate, update and fix tmsnc, it needs libform in ncurses package. tmsnc in wib will be available soon

fix compile problems, still does not compile on BSD

* 920-integer-overflow.patch: apply to freewrt-1.0-stable branch
  as requested by wbx@ in Message-ID: <20070128011553.GA2222@freewrt.org>
* Makefile: apply same patch as in trunk: add svn revision to gcc
  version information, so that people can see if they have the updates

some cleanup, set svn:ignore properties, so latex output crap doesn't get recognized

- added init-script that honors "autostart" option to be FreeWRT compliant
- added entry to rc.conf
- cleaned up install section of Makefile

add sections about fwcf, startup scripts and ipkg

fix memleak from https://dev.openwrt.org/changeset/6011

remove kmod-usb-atm, we have no hardware to verify if this stuff is working

remove peerguardian, stdc++ needed, but we do not support it right now

adding back comp-lzo, since in older versions it cannot5D be negotiated

Fix forgotten target names, now it builds

fix target names, i have overseen this. 1.0.1 comes earlier as expected.

* '%' as line addressing is a BSD extension to the text editor,
  which GNU ed 0.3+ doesn't support, but isn't listed in the
  ChangeLog relative to GNU ed 0.2 - use ',' instead
  bug cought by n0-1@
* correct line addressing of "TOPDIR:=..." line in prereq.mk

mention default password, requested by mrbibo in IRC

smallest possible fix for the bug reported in
Message-ID: <45ADE560.1010806@marcant.net>

this is fixed differently in trunk

comp_lzo is default on, no need to configure it explicitly

some more information about device state in failsafe mode

release +1

minor fixes, remove duplicate files in ipkg

fix creation of base-files-arch, reported by ulmen some time ago

fix from trunk, install libraries correctly

copy files before package build

/tmp must be 1777

* add licence to fgetln.c from hector Garcia <hector@debian.org>
* sync strlfun.c and update-patches with latest miros licence template
* replace older miros licence template on the other files with
  easier freewrt © notice because they're not that "deep"

fix some duplicate files in libncurses, remove some unneeded variables

cups need libpthread-compile

add libaudiofile to build

add reference to handbook

sync with r5786 from openWrt

update database

add checks for texinfo (makeinfo), closes: #167 #170 #171

fixed for integration of images into html output

Added guide for flashing via web iface of original firmware

* fixed the $\star$ issue, replaced it with \textbf
* improved Makefile a bit, now html docs are created
  as single file as well as splitted

enable nohup by default, needed for some background scripts

Sigh, typo in option.

Fix detection of ppp UMTS connection

drop linkname support

Fix linkname bug in umts interface, add initial interface file to trunk, fix umts-pincode

Oh yeah, wrong filename...

Revert r1385, fix directly in source

Fix for Ticket #166

dnsmasq uses /var/lib/misc for its leases file, so we have to create it somewhere.

add html output, remove $, because it breaks html output, need to find a better fix soon

we need the cgi-scripts in /usr/lib/cups

Fix cups build, drop libexec dir

fix small mistake

update cups to latest stable version, fix problem under OpenBSD compilation, fixes segfault

add workaround for UMTS instability, #156

fix security problem, mtd devices shouldn't be readable by an unprivileged user

split kmod-crypto package, MPPE uses ARC4/SHA1, no need for the rest AFAIK

fix raddump build, found by wib user

use shell script for package list

add webdav package to menuconfig and build, recognized by wib error mail

remove unmaintained software

remove the hackish patch. -Os in gcc produces the bug. we use -O2 for now. 200 kb bigger binary :(. I will close the ticket. may be a gcc update in the future will cure the problem.

fix segfault in an ugly way. i have sent a bug report via email to upstream

remove stampfile, closes #154

remove diff stuff from ipkg, busybox does not have a minimal diff implementation

add some minor changes, remove some comments, remove the name buildroot

Update iptables ipopt documentation

implicit broadcast will be handled correctly by ip tool + actual kernel

Add ipt_CLASSIFY target, closes #157

ipsec-tools is kernel 2.6 only, brcm-2.6 is planned for 1.1, so we keep it in trunk

fix package build, recognized by wib autogenerated mails

wrote some documentation about freewrt installation

nls-base seems to be included into the kernel, if you choose it.

fix annoying crash when setting interface up and down twice

My wgt survived 5 minutes doing:
while true; do ifup -v ath0 ; ifdown -v ath0;done

Patch from here http://madwifi.org/attachment/ticket/914/phydisable.2.diff

closes #133 in FreeWRT.

fix wan port initialization bug on Asus WL500g deluxe. Seems to be the only supported model, which needs this.

* drop svn patches from patch-dir
* update source file to latest svn snapshot to fix security issue
* drop wbx's converted patches, because they are unmaintainable
* add autocreate=none patch
* add compile-option patch
* add multicall-binary patch
* update post-down script
* add disable-rfkill patch

some more stuff, snapshot build via ib.sh -s works again

removed obsolete chat template

- synced with changeset:1274 to restart openntpd on possible WAN connection

- updated init script to common style
- init script start service in daemon mode now
- removed hotplug script because ez-ipupdate keeps track of the
  configured interface on its own.
- added rc.conf option

- changed UMTS ppp config to use comgt for dialing, thus chat has
  no longer to be installed.
- removed the chatscript template stuff
- removed some custom comgt scripts as the functionality is builtin now
- added comgt_h patch to fix a typo in a builtin script

damnit, I forgot the renameing :(

- upgraded to newer upstream version (some fixex in Makefile etc)
- used update-patches to create Makefile patch

imported networking howto

- added product and vendor id for Novatel XU870 expresscard

autocreate is a workaround for constantly dying routers when
switching the WLAN mode. You can use ap,adhoc,sta,monitor or wds
as valid mode. Please unload ath_pci before switching.

Support for Ad-Hoc mode with WEP keys

add parts about cross-compile and buildroot

try to rework snapshot build

lockd/sunrpc modules needed for nfs server

rmeove non-working owfs package

add broadcast to interfaces template, fix switch config for non-switch devices

remove All Collection, add snapshotconfig idea from trunk

There are some confusion about default services enabled. To calm down
discussion, reverting DHCP-Services on by default is a good idea. Revert
r1240.

removed FWRT_PACKAGE_BROADCOM_NAS, FWRT_PACKAGE_BROADCOM_WATCHBUTTON
and FWRT_PACKAGE_BROADCOM_WL_UTIL from Config.in.collections

These packages should not go into Netgear images and manage their
dependancies on their own.

Update wpa_supplicant/hostapd package

Start dnsmasq by default on LAN when unconfigured

Move down-script to post-down

Update atheros network support

fix buffer problem, closes bug #142

change wifi security mode from open to none, fix ad-hoc mode

add nfs-utils package, add kmod-fs-nfsd, fix tcp_wrappers build

remove some .orig files from patch

fixed bug #147

fix mtd update for netgear images

use a syscall to reboot, makes -r work for failsafe, too

use make update-patches to generate patches. start ucdhcp as background process, so that you can later attach a cable and still get an ip address without reboot. add address/broadcast parameters to ip link set

add some wget options, patch from  Thomas Peterhans

add some depends

fix problems on OpenBSD host, reported by Ulrich Kahl

gl has reverse switch config

ussp-push need openobex

use /tmp as www-root, closes #146

first attempt internationalizing my template

add startup script for hcid and sdpd

add bluetooth obex push application

provider ist used for pon, not interface

fix url to faq

one more step towards client-mode + wpa-psk, currently does not work with PSK/TKIP

Update openswan to 2.4.7

add dependency

remove some unneeded nvram restore settings

add ebtables support, no clue why it got lost, add dependency between packages and kernel modules

yeah, i am breaking my own rules. No new packages in stable branch is the rule, but
a working and tested bluetooth stack in FreeWRT 1.0 without applications to use it,
is bad.

obexftp seems a little buggy on MIPS, but openobex will be used for ussp-push, which works fine.

fix typo for kmod-nls-utf8 package

fix some minore issues, remove kmod-iptables, remove ser2net as asus dependency

add missing packages

fix download url and name for package libaudiofile, found by volkeer via web image builder

prepared for handbook user/devel-split, also inserted a first snippet for the devel handbook

enable bridging support by default

Ok, moved the handbook to the right place now.

Remove link to obsolete sip-module, common whitespace fixes again

now it works, nice document at http://pauli.borodulin.fi/hw/BCM2033_and_OpenWRT/

* fix some broken symlinks in pthread and bluez-libs package
* add bluez-firmware package needed for my bcm2033 usb bluetooth dongle
* activate bcm203x utility in bluez-utils
* add bnep kernel module
* load bluetooth kernel modules

fix iptables-mod-extra, thx spaetzle

sync kernel config

fix nopackages snapshot builds

Added preliminary Ad-Hoc mode support

fix xsupplicant build on systems with grsec (no access to procfs)

2.6 support is not needed for 1.0

removed CONFIG_DEVEL and other cleanups

readded support for all USB core modules for WRT54G3G routers

enabled USB module support for WRT54G3G, needed for some UMTS cards which provide internel USB-Hosts with usbserial interfaces...

a little more cleanup

disable mini-fo

 fix small bug from last commit

remove udev here, too

add nls packages, add switch drivers

remove udev, just usable for 2.6

remove static version of snmpd

add note about fwcf commit to banner, we still need user docs for this

add mini-fo fixes from OpenWrt, mini-fo is now enabled in the squashfs-overlay kernel

update from upstream - fixes bugs in strlcat() implementation in rare case

some small fixes

Revert quiet patch of 1094, choosing shell quiet

make openvpn also usable with standalone ip-package

fix build depency for wpa_supplicant

moved dropbear startup config to /etc/rc.conf, synced double quotes from trunk

yet another dot too much

cleanup, removed dot

added dependancy for hostapd on WGT634U devices

disable bzip2 by default

silence busybox, added NETMAP iptables target

Update madwifi to svn trunk

fix removal of *.old files. This reduces the package size by 50%.

Broadcom wireless station mode without encryption

add patches from #135, thx christian gmeiner

enable nls modules and some filesystems in kernel config

nls stuff

added nls module stuff

fix owfs build, sync alsa fix in trunk

another bug report from s.geegus, fix alsa build

Asus deluxe seems to have uhci and ohci, but only uhci is accessible without soldering, report by s. geggus

add group features for packages

New banner font for FreeWRT

enable nls modules and some filesystems in kernel config, create kmod-nls-cp437 package, start for the nls/fs module cleanup

remove extra meta package

repack tgz

add kmod-packages and dependencies for all packages, thx dave for the schema changes

remove unused control files

wlcompat build fix, already fixed in trunk with [1059]

fix typo

fix dependencies

upstream url is not there

remove duplicate entries, remove deleted packages

remove obsolete control file

remove debug version, fix dependency

remove rrdtool1

* remove rrdtool1, we do not need two packages with same functionality
  (idea by dirk some time ago)
* remove empty Depends: lines in control files
* remove iptables extra meta packages
  (more cleanup for iptables / kmod-iptables needed)

small error in help text, thanks atari

Update all hostap/supplicant packages for madwifi

remove ip dependency, it is in base install

fix conffiles

deluxe seems not like netgear, just normal, reported on freewrt mailinglist

replaced separator '/' to ',' because '/' might be part of the username i.e. for T-Online

Add client WEP support

{ doesnt work in single line statements :-(

Sync with current version

Fix wireless-script typos

* Chance wifi-prefix to wireless to keep Debian compatible
* implement more wireless parameters
* drop unsafe wlan examples from interface (WEP128, no encryption)
* wireless will now be started in the pre-up script

fix dependencies, thx ulmen

fix all remaining init scripts, normalize

add missing postinst from earlier commit

add bind to snapshot build

fix build

add startup script for dhcpd

sync with mainstream

Updated wifi driver configuration scripts, atheros still unfinished

change * to IPv4 any address

* ntpd-listener activated by default
* synchronizing is way too slow when difference <180 sec. Forcing
  immediate time update on startup

Markus don't like my style, so I give up ;-)

small fixes to openvpn.init

reactivated UHCI driver, it's needed at least for USB 1.1 devices on Asus WL500GP

update to samba 2.2, which solves some problems I had with the very
old version. creating and deleting files and directories with whitespaces
is possible now.

and some more Config.in cleanups

the client needs to be compiled too... and here also comes a cleanup of the horribly broken Config.in

there are no *.default files in './files'

changed startup behaviour to check for multiple .conf files, maybe someone uses more than one tunnel

removed iptables submenu to have same look'n'feel like the other packages, grouped ip/tc under iproute2

drop updetach completely

more init script fixes

commented out 'updetach' as it blocks startup on failure

deactivated ip and ether-wake package while they are selected in busybox

Revert my SIP patch, which was not ready for primetime

fix more typos from last bulk commit

remove mtd-static package, we just need a mtd-static binary for tools directory, but not as package

add prerouting_rule for NAT

fix build

fix typos in parport support

fix half of the init scripts not conforming to
our standard. thx very much ulmen!

* cleanup kernel modules, remove unused/unsupported stuff 
* fix dependency for parport related modules, so 
  that users does not activate it on the wrong devices
* install failsafe to BIN_DIR
* remove wlcompat debug version

fix switch configuration for Asus WL500g deluxe and
Netgear WGT634u. switch driver recognizes reverse port 
configuration

Tested on Netgear.

we're almost at revision 1000, adapt the banner width for that

In accordance with wbx make squashfs-overlay default choice

delete special failsafe, default script is fine

disable ppp interface renaming: breaks defaulroute (now fixed) and ppp accounting. More testing needed.

sync dnsmasq with trunk

Revert r977, breaks build dependency

remove amwall, see r875. Remove remaining wificonf stuff.

fix build

merged my commit from trunk r976 to branches/freewrt_1_0

drop --enable-largefile from makefiles. 2GB should be enough in most cases

fix build

fixed dotted lines in menuconfig

Fix OpenVPN build

* Implementation of wifi interface without using nvram
* dropping wificonf, replacement is broadcom-wl-util
* sample config interface for 1.0

added umts/dsl examples

added small scripts to handle UMTS-LED state

tabify

for now, do *NOT* run 'fwcf commit' automatically, EVER.
there are concurrency issues when run twice at the same time,
e.g. if the second ssh-keygen is faster than the first fwcf commit,
and then the device becomes unusable

error report in IRC by "frop"

as of now, 'fwcf commit' is only to be run manually by the admin.

renamed hotplug script

- moved init-script
- fixed grep in init-script
- added postinst to update rc.conf

fixed svn:executable

added content after renaming

renamed files and added init-script

fix squashfs filesystems on netgear

- added ip-up script to rename pppX interfaces to "linkname"
- added if-pre-up script to parse ppp "templates" before
  doing "pon <provider>"
- tested with dsl and umts connections

sync dependency cleanup with trunk

fix dependencies, thx martin ley

sync with trunk

startup script cleanup

sync with FSF version (address change, etc.)

update to fwcf-1.01, requested some time ago by wbx@ for both branches
tested only a rebuild of the package in 1.0 branch, but the changes in
the code are minimal...

snapshot without images, usage for the two modes, snapshot mode and web image builder mode

merged dropbear runtime config with trunk

sync tcpdump and libpcap with trunk

add missing jffs2_opts to root fs creation

remove debug version from snapshot build

remove mtd static from snapshot build, the static version is only needed if you want to update from a different firmware to FreeWRT and can be found in http://www.freewrt.org/downloads/tools

refresh database, all devices included

add missing serial file

add missing postinst script for snmpd

fix image builder, use database to find out the image type and image options

no luck today

forgot to remove default file

fix snmp startup script

add patch from christain gmeiner, closes #119, added serial and index.txt, which are needed for a ca with openssl

update to 1.0.39, memleak fixed in upstream, fix init script

add broadcom-wl-util as package

remove noise when building

fix monit-nonssl and cleanup init script

cleanup watchdog init script

add to startup, bump release number

fix avahi startup script, if rc.conf variable is empty, do not start

remove duplicate binaries

add missing file, dirk, please use svn status, before commit

brown paper bag erroR

openswan build fix

Merge firewall scripts from trunk.

Advertise PPPoE MTU

Fix wifi scripts: now we are using /etc/network/interfaces

there is no 'pre-down' hook in ifupdown

fix kernel meta package dependency, close #110

cleaned up makefile and added hotplug script

fixed path to hotplug.d directory.

added nozomi driver to collection

added nozomi driver for UMTS support

TAINTED_CHECK is required for example to use usbserial. otherwise the symbols tty_ldisc_ref and tty_ldisc_deref are not found.

add broadcom mmc to full selection

I don't feel good with this, maybe we find a better solution to upgrade ath_hal inside madwifi

added this damn alias ;-)

migrate openswan to ip, remove unneeded patches

enable hotplug for dhcp and fix ntpclient to use ip

we need to up the interface

remove bad startup script

remove nvram call

else missing

wrong commandline order, from dirk via trunk

changed eth1 to replacement macro @FWRT_WLAN@

changed ifconfig to ip

add mmc driver for linksys wrt54g mmc hack, contibuted by ulmen, thx

upstream is no longer available

add a default timezone, patch from dirk

remove part of the linux-mips patch, needed to get ext3 loaded, fixes ticket #109

simplify network configuration, use one interfaces file and generate device specific interface files

patch from ticket #114, fixes some gcc 4.1 issues, thx

i forgot one file

add openvpn patch from dirk, we are using ip for network configuration, add an example configuration

fix bug from ticket #112, thx for the report

add some new targets and changes to ib.sh, to get a snapshot build

update my mail address, remove keyword

ipsec-tools is 2.6 only, deactivate for snapshot buld for now

add patch from trunk, solves compile problems on fedora reported by dirk, he fixed it together with tg@

use VERSION in package path for ipkg

fix startup script, report from dirk

sync with trunk, add ppp pon/poff and examples for interfaces, thx dirk

fix, hopefully last time

add some local paths, can be used with buildroot standalone for snapshots

add a first shot database, not perfect, but I need it for testing on another buildsystem

fix hostname, does not work with ash, thx AndyCap for reporting

separate runtime and collections in separate files, add all package selection

fix sqlite call, add a buildroot2database script

fix wlan example, it is eth2 on premium, the strange eth0/eth1 problem for b44 driver still exist, no need for up wifi

change base directory for cups

remove autobuild and snapshot targets. snapshots and releases will be done with ib.sh

we decided to use sqlite3

add missing ipkg control file

fix initscript for openssh

revert r807, we need the virtual kernel package

we need the directory to avoid a warning

we need the directory to avoid a warning

* add busybox ip as default for network configuration
  (suggested by Dirk and Markus, used some of the patches)
* fix dropbear startup script
* disable some more ipv6 apps (we need a ipv6 package collection..)

Failsafe, LAN ip address and dhcp on wan works fine.
ifconfig/route is disabled, we added some aliases for
backward compatibility. A modern linux distribution should
use modern network configuration tools.

add MODEL variable for all firmware filenames, make an empty target for autobuild

we need to rename MODEL -> DEVICE, because model is already in
the namespace of the funky ruby webadmin plugin..

* bring package in shape
* add postinst and init script
* update to 2.0.5 upstream

* normalize postinst script
* try to add rc.conf to startup script

fix reset button for asus wl500g premium, no gpl package available, so try and error helped here

* add interfaces and preinit.arch for all devices.
* add examples for bridging from Dirk
@Markus: please check preinit.arch on linksys wrt54g3g

fix make subdir=target/linux/brcm-2.4 kernel-compile, needed for snapshot builds. add two new targets. fix patch target if directory does not exist

remove empty dir

* remove unsupported kernel 2.6 support
* remove sdk completely
* remove imagebuilder, we will use a shell script
  and a web interface instead of this
* remove webif/webif2
* remove braodcom-scripts and old nvram based setup

Results after discussion on the mailinglist. Dirk and Markus vote
for removing webif. I never wanted webif, because it is unmaintained
and does not work with ifupdown network configured systems.

FreeWRT goal is to be an appliance development kit, if someone
has time and fun to create a webbased wlan-dsl-router appliance,
which just works for home users, feel free to use FreeWRT as
base linux distribution.

fix for g3g, if variable is empty, do not try to install, found by markus

first version of a shell based image builder.
It uses a sqlite database to get information about 
supported architectures, boards, models and filesystems.

A ready to go database for FreeWRT 1.0 will be added later.
The database is shared between Web Imagebuilder and this
backend script, which can be used standalone.

Thanks David for the database design!

remove the kernel package for now, it was empty anyway. add kernel and bootloader to $(BIN_DIR)/kernel, needed for ib script and web image builder, remove some empty variables

remove the kernel package for now, it was empty anyway. add kernel and bootloader to /kernel, needed for ib script and web image builder, remove some empty variables

add support for asus wl500g deluxe, boots up fine, add memory fix on bootup or if nvram is deleted

add fixes from dnehring

we need to enable vlan on boot, at least on asus wl500g deluxe

* part 1
do not overwrite ARCH in mk/targets.mk
ARCH is used for ipkg package creation.

Add two new variables:
CPU_ARCH -> architecture + endianess f.e. mipsel
KERNEL_ARCH -> architecture for Kernel modules f.e. mips

fix all kernel module packages to use these variables.

* part 2
start creation of board+kernel+model+fs specific
base-files-arch and kernel packages. needed for web image builder (wib)

enable and reset switch before setting ports

enable squashfs-overlay

enable -fno-delayed-branch.

It solves the stability problems with squashfs-overlay and squashfs-symlink 
filesystems. This is a performance issue. In OpenWrt whiterussian with 2.4.30 and 
the 003-bcm47xx_cache_fixes.patch has solved it for many routers.
This seems to not help with 2.4.33.3 or 2.4.32. May be we will find
a better way later, but I don't care about performance, when my routers
crashes suddenly or different applications like cups behaving strange.

If you see in dmesg "Calibrating delay loop... 3.12 BogoMIPS", you
should definitively try -fno-delayed-branch.

See http://en.wikipedia.org/wiki/Branch_prediction
http://gcc.gnu.org/onlinedocs/gcc-3.4.6/gcc/Optimize-Options.html#index-fdelayed_002dbranch-400

* sync with changes in trunk
* lzo2 instead of lzo
* fix tinc/vtun build 
* security update for openssh/openssl
* update for iproute2,openvpn,openntpd, iptables and ipp, openswan
* disable ipv6 in busybox, autoselect this feature for all ipv6 related packages
* add better startup scripts for openssh and openntpd

add cache fixes back to brcm-2.4 folder, needed for other models, too

* add separate syslog script
* register syslog start and flags in /etc/rc.conf
  you can set remote syslog flags in /etc/rc.conf
* remove old FAILSAFE variable from rcS  

Bump release numbers.

simplify symlink boot, no restart needed

the time to wait is not so long 

fix mrd6 compile, you need to rebuild libnotimpl

add default network configuration for Asus Deluxe (non-nvram based), revert ip if not in failsafe

fix falsafe for jffs2 and squashfs root, fix old nvram based network configuration

fix banner, mentioned by tg@

change package dir to stable dir

add failsafe util from OpenWrt to host tools, needed to get into failsafe mode

readd webif1 from revision 722, with small patch for ipcalc path

move webif (x-wrt) to webif2, may be we will activate it for 1.0.1, if it is tested

remove nvram hacks, will be added to model specific files

add a warning

sync vlan.pre-up with trunk (next bug)

sync vlan.pre-up with trunk

move loading of mini_fo to mount_root

add all patches from trunk, needed for ifupdown network configuration, add basic configuration for asus wl500g, verified and tested

fix path to ipcalc

remove asustrx and add the functions to trx.c, fix asus trx file creation (tftp and web update tested on wl500g)

merge changes from trunk

* add package collections, the two collections will
be used for the upcoming beta phase to produce firmware binaries

disable overlay filesystem, it is still unstable and not useful for the first planned stable release, we need to fix it for 1.1

update banner to 1.0 with subversion revision

create stable branch, feature freeze, please send svn diff patches to wbx

- added two hook scripts for ifupdown to configure vlans and bridges
- added hook scripts to Makefile
- added rc.conf query to broadcom network.init script

example for interface with bridging and vlan configuration.

sync kernel with linux-mips.org

some cleanup in fuse package, add wpa_supplicant dependency to madwifi, remove util-linux menu

just use one package for shfs

please test before you commit a tree break, thanks

fwcf 1.00 with LZO1X-1 compression, without dependency
on the ~150 kB zlib

ok to switch wbx@

PS: pkg-depend.mk belongs into package/ not into mk/

strip the .comment section too, shaves some bytes off the executables
also add licence boilerplate

add back "specific packages" suffix

added basic umts startup scripts and separate package available for g3g routers

updated static hierachy numbers and added firewall page

yet another renaming

added small documentation of the menu layout

renamed webif pages to reflect their menu structure

added some webif-pages from x-wrt, updated some old ones. This ist totaly not tested yet and needs some review/rewrite

it's really difficult to quote correctly, isn't it?

clean up .config for new kernel

mv kernel version to 2.4.33.3

add fwcf commit after ssh key generation, automatically save ssh hostkeys on fwcf partition

add some missing stuff from last commits, add asus wl500g premium files for non-nvram based configuration

add function delete fwcf on update

better remove some more packages from list, so that no essential packages are removed accidentally via web interface

make broadcom-scripts default for all models, but not netgear wgt634u, add some depends lines for broadcom specific packages

* add PKG_VERSION to every package in default selection
* add broadcom-scripts package as default for 1.0, it adds
  network and switch configuration scripts to base
  suggested by markus to separate these from webif package
* move ed to application and disable by default, sorry tg, but
  not everybody needs it
* be sure that if broadcom-scripts are installed, new ifup/ifdown
  network configuration is not used

add /etc/network/interfaces for wrt54gs 1.0

remove some fprintf

removed mk/targets.mk include... I copied a wrong template

added empty hotplug directory for button event

remove verbose output

remove boot_wait activation, asus wl500g has recovery mode and boot_wait always on

remove accidently commited stuff

add a sensible text editor, because busybox' vi is horribly
broken, even according to wbx@ (vi fanboy)...

add -fno-ident, on the host too (I wonder what host-built
files get into the target... libgcc probably)

add asus trx for webupgrade of asus wl500g/wl500gx/wl500gp, make cleandir is a good idea before compiling firmware for one of these models

my bad, I still had underscores in mind
re-order so we don't need to hardcode brcm et al.

optimise for size by default

even so, everything is much much larger than on i386-bsd,
is that the libraries, the compiler or the platform's fault?

fix the script for asus-wl500g-deluxe

add small example for addon configuration

fix wireless network configuration on netgear

* remove unneeded login script, just call telnetd in failsafe mode
* remove non-portable nvram check for failsafe variable

PR #86

diff -I gets an extended regular expression, but grep uses basic regexen
cf. http://www.mirbsd.org/man7/re_format.htm

* configure scripts are not always executable, prefix them with ${BASH}
* WRKBUILD is not always WRKSRC (e.g. for Berkeley DB, gcc)

do not build mypackage as default, save some space

* INSTALL_DATA is not the right thing if you have symlinks 

very stupid idea from me.

use up commands to configure wireless, pre-up scriüpt does not work correctly

switch to FWCF

ok to enable now wbx@
bugreports to tg@

allow -F to force to not check, for non-TRX partitions

ssh is for root only

fix squashfs-symlink, add network configuration for asus wl500g deluxe, add pre-up wireless script

we need to flash to different addresses too

fix ifup dirnames

switch to /etc/network/interfaces, if webif is not installed, add default network config for wl500g, more to add soon

fix the ipkg file, oops, forgot that one

we do determine the hostname slightly differently from the rest

determine type of board from the file name

"fix it if you can" wbx@

add a few dependencies the shell script has

add initial fwcf package, from pkg example derived

DO NOT SELECT THIS YET!

But positive critiques are welcome.

add the missing v3.1/v4 from linksys wrt54g, which are very equal to v3 and should be supported

example for a simple library package,which installs stuff to staging_dir

add mypackage, which can be used to overwrite FreeWRT default startups scripts, can be used for customized freewrt builds, will be installed as last package

move default to standard dir files

* add back support for squashfs with symlinks on jffs2
 mini_fo seems to produce some very strange problems, unsure if 1.0 will have overlay support... 
* not verified yet, tg blocks my network card, because he is online over my umts card and working on my testrouter connected to his second nic, which I used to test 
my changes, but now he use it for fwcf hacking...

we use the httpd redirect here, my bad, this is by design
and actually makes sense

* mention that we bundle non-GPL'd tools (e.g. paxmirabilis),
  whose licence needs not be GPL-compatible (but OSD/DFSG-free)
  in the svn source tree (LICENCE doesn't cover distfiles that
  don't originate from ourselves)
* mention the web page for the licence

by request of markus@ communicated via wbx@, add new facilities:
$ make [V=99] package=mksh clean prepare compile install
$ gmake [V=99] subdir=tools/paxmirabilis clean prepare compile install

This works as follows: if ${subdir:-${package+package/${package}}} (in shell
syntax) is specified (you can only specify one subdirectory, and the package
variable has precedence over the subdir variable), all make targets specified
on the command (if any) are passed to a GNU make run in the subdirectory spe-
cified (packag/${package} or simply ${subdir}), relative to ${TOPDIR}, with
environment appropriately set and ${MAKEFLAGS} passed.

also, while here, recind the advertising clause on the top-level Makefile and
integrate this stuff with the new boilerplate (attn: licence URI adjusted);
the requirement to credit my name is contained in the GPL as well

accidently removed Asus deluxe, get it back

add a nvram free example for a firewall

mv firewall init to webif. still not ready to work with webif.
as default we need something more simple as an example.
I have learned real operating systems, like Debian GNU/Linux 
and OpenBSD have no default firewall.

* add a generic network init script which is using busybox ifup/ifdown
* move ifup/ifdown with nvram calls to webif package
* add specific dnsmasq.conf and startup script for dnsmasq for webif
* add version file

This unbreaks DNS/DHCP options in Webif. Even WPA/WPA2 seems possible
if you install broadcom-nas package. I have no WPA/WPA2 enabled box
or operating system to test..

tg@ will add some rc.conf checks so that either webif network 
configuration is used or ifup/ifdown from busybox

add an extra option in menuconfig for your own prefix for 
firmware image files. useful if you develop your own appliance 
based on freewrt buildroot. 

i lost these between the commits ;)

remove bridge-utils here, webif will select it, normal network config is without bridge

cups needs zlib

add back modules file

update madwifi to 0.9.2, works on netgear

select wireless tools for netgear wgt634u

fix mtd partitions for netgear

fixed wrong variable and missing directory creation

added wwan_auto checkbox for UMTS button usage

fixed spaces to tabs

removed 'on'

added small watchdog for WRT54G3G button. This is intended to be replaces as soon as gpio is handled on interupts.

Fix wrong path for netfilter.mk

add missing file

add KARCH variable asworkaround for now, builds little endian madwifi drivers

remove nvram call in preinit.arch

add bridge-utilsto linksys/asus models, addsome missing board vars

forgot two files and a change in Makefile in last commit

* remove model specific kernel configuration from asus/linksys
* add a flash-map patch for brcm-2.4, contains two map drivers
* add a special kernel configuration for netgear
* add some startup scripts for netgear (failsafe/preinit.arch)
  without nvram calls
* netgear wgt634u jffs2 image now boots up!

hmm. i am to stupid for svn

rename bridge to bridge-utils, like upstream package name

fix netgear image creation

mv netfilter.mk to includedir, create modules-2.4.mk

remove CONFIG_DEVEL, all architectures can be used by boards

bump package patchlevel for markus@
after revision 641-643's changes

fixed path to ipcalc

fixed path to common.awk

moved ipcalc to webif as it uses a webif awk file

add http tunneling software, i used the pkg template and it works quite good. under 15 minutes to get a package. need to make runtime checks tomorrow

add a normal init script for openvpn, use and install a specific script (openvpn-webif.init) for webif usage

this script always fails for me. We need to find some more generic way to add
new categories to webif, which works.

* add experimental broadcom-nas package for WPA/WPA2 support of
  broadcom wireless drivers.
* move all broadcom specific userland applications to
  Base - Board Specific - Broadcom
* move dnsmasq, iptables and bridge to Network

fix paste and copy mistake

add the old /usr/lib/common.awk from base-files rev. 471
to /usr/lib/webif/common.awk and use it; bump package patchlevel

this _might_ unbreak webif

reported by ArteK in IRC

fix the template

(do we have pkill? then change foobar.init killall -> pkill
because that's much more portable... not that it matters for
FreeWRT, but "killall" is not standardised and as such ought
to not be tought)

add a template for a single binary package

fix PR#82, sort

apply patch from PR#81 by pylon@koeln.ccc.de, thanks

Apply patch from PR#83 by pylon@koeln.ccc.de:

| ncurses is a dependency for screen, which is currently not in screen's
| Config.in
|
| Furthermore in package/Makefile package-$(FWRT_PACKAGE_LIBNCURSES)
| needs to be added, so that a binpkg will be built.

address PR#71 by ripping out OpenWrt's crude cross-compile
hack and replacing it with something much more lightweight
which isn't the proper solution either but works

the option was just one character too wide,
and since we're only building one image anyway,
just use the singular

unbreak this, spotted by eJunky

some more wrong INSTALL_DATA, thx pylon for finding these

jffs2root is needed for squashfs, to mark the dynamic partition as clean

nmap needs libgcc, cleanup some Config.in

* remove redundancy
* remove whitespace at EOL etc.
* don't confuse command line (ssh admin@192.168.1.1. <- that full stop
  was used to denote the end of the sentence, but people might type it)
* passwords can be changed after all

missing hash

remove unneeded patch

move jffs2root --clean before dropbear keygen, automatically reboot, after creating jffs2 partition, implements the requested robust update by markus@

mysql_config need to be exectuable

Config.in problems. select COMPILE otherwise Switch module is missing in netgear image

add squashfs mount_root

add some more info for wl500g

add postinst script and a real startup script

fix some glitches from commit #600

add mount_root for rw root images

add rootfs specific mount_root, simplifys new root filesystems, make mount_root portspecific. add preinit.arch for asus wl500g, without switch stuff

add separate crond script to busybox package, do not startup by default. use /etc/rc.conf to activate

revert, tg is awake and controlling my bad commits

use a default /etc/hostname

INSTALL_DATA -> INSTALL_BIN

update info for root filesystems, overlay seems more buggy than jffs2, prefer jffs2 for now

revert the bad idea, if ncurses.h is missing you do not see the problem otherwise

doku will be added to trac wiki, one place.

add header

move some makefiles to mk

major package Makefile cleanup. remove mostly-clean, add licence header, always use RSTRIP varibale for stripping, rename some init scripts, indent

shit, again this bug. don't know how i get it in again. should unbreak switch-adm module

rename configfs to fwcf, because the name configfs is already in use, suggested by tg@

add WORDEXP needed for pcmcia-cs and alsa-utils, found by either markus or felix

fixed wrong version information

added quick and dirty hotfix for libtool misbehaviour, we should got to freeradius 1.1.3 soon they updated autoconf and libtool stuff.

really remove target/linux/package/

fix header for firmware image